Car Detailing | Paint protection palm cove - cairns.

 1. Full Inspection
Every car starts with a detailed inspection to identify paint type, existing defects, and the level of preparation required.

2. Foam Bath & Iron Decontamination
We begin with a gentle foam bath wash, followed by an iron-removal bath to safely break down embedded contaminants. This gives us a clean surface to work from. Some will require a clay bar treatment.

3. Drying & Preparation
Once dried, newer vehicles typically receive an ultra fine polish to unlock clarity and gloss without unnecessary paint removal.

For modern vehicles with newer water-based paint systems, we often use a jewelling technique, a slow-speed, ultra-light polishing method with a finishing pad. This maximises gloss and creates a highly refined surface perfect for ceramic bonding.

4. IPA Wipe Down
The paint is wiped with an IPA solution to remove any oils or residues, ensuring a clean surface for the coating to adhere to.

5. Ceramic Coating Application
A Gtechniq-certified ceramic coating is then applied, forming a durable, high-performing layer of protection.

If you’re looking for maximum water beading, we can apply Gtechniq ExoV5 on top of the ceramic base layer. EXO increases slickness, enhances hydrophobic performance, and extends beading longevity.

Crystal Serum Light From $1100

High Gloss Finish

Chemical Resistance

5 Year Warranty

Crystal Serum Ultra From $1500

10h Protection

High Gloss super slick

9 Year Warranty

EXOv5 Add On From $350

Lasts 18 to 24 Months

High Water Repellency

This is a Add on to increase beading to Crystal Serum Light and Ultra Coats.

2 Days To Complete

 1. Inspection & Paint Assessment
We evaluate the paint thickness, condition, and previous polishing history to determine the safest and most effective approach.

2. Wash & Decontamination
The vehicle receives a foam bath, iron decontamination wash, and clay if needed to ensure the surface is completely clean and ready for polishing.

3. Machine Polishing
Depending on the condition of the paint, we offer:

• Single-Stage Enhancement
  Removes light defects and boosts gloss. Perfect for newer cars or well-maintained paint.
   
• Multi-Stage Correction
  A more intensive process involving cutting and refining stages. Ideal for older paint, neglected surfaces, or heavier swirl/scratch removal.
   

Modern water-based paints may also receive a jeweling-style finish for maximum gloss and clarity.

4. Final Wipe Down
After correction, the surface is wiped clean of polishing oils so you can clearly see the true result — no fillers, no illusions.

5. Ceramic Sealer

Gtechniq C2V3 Spray on Sealant is applied. This will give up to 8 months Protection.

Most Customers will pair Paint Correction with a Ceramic Coat.

Starting From $600

2 Days or More To Complete

Whether your buying or selling, or just in need of a freshen up.

• Full exterior foam wash (including wheels & arches) 
• Clay bar treatment (if required) 
• Safe hand dry 
• Engine bay soft wash 
• Full interior vacuum 
• Steam clean interior surfaces 
• Shampoo carpets & seats 
• Leather clean & condition (if applicable) 
• Plastics cleaned + UV water-based protection (non-silicone) 
• Light paint enhancement (finishing polish – gloss improvement only) 
• Paint correction available as an add-on 
• Gtechniq C2V3 ceramic sealant applied 
• Wheels dressed 
• Exterior plastics dressed

From $600

2 Days To Complete

Annual Inspection

It is recommended under the Gtechniq Warranty System to have an annual inspection to ensure the ceramic coat is performing correctly.

Over time road grime attaches to your vehicle and can degrade the coats performance if you skip regular washing.

1. Inspect Coat

Washing habbits are discussed as well as inspecting the vehicle in its current state.

2. Iron Bath

Foam Soak and Rinse. Followed by Gtechniq Iron Remover. This is left for a few minutes and rinsed. Followed by Soft Wash and Blow Dry.

3. Gtechniq C2V3

C2V3 is applied which aids in bringing the coat back to a cleaner performing surface.

$120

This service can also be used on any other branded Ceramic Coat you may already have.

3 To 5 Hours To Complete

Fabric , Leather , Trim

Protect and preserve your vehicle’s interior with premium Gtechniq interior protection products for leather, fabric, plastics, and trim. Designed to help resist stains, UV damage, dye transfer, and everyday wear while maintaining a natural factory finish.

I1 Smart Fabric AB

Lasts Up To 12 Months

Antibacterial Anti Mould

C6 Matt Dash AB

Abrasian Resistant

Anti Bacterial

UV Protection

L1 Leather Guard

UV Protection

Anti Bacterial

Starting From $400

Interiors that need more pre cleaning before applying is Extra

1 To 2 Days To Complete

Get your interior looking fresh, clean, and protected with a thorough interior detail designed to restore that well-kept feel without greasy finishes or silicone shine.

Services include:

• Full interior vacuum 
• Carpet cleaning with Tornador foam shampoo system 
• Fabric seat shampooing where required 
• Leather seat cleaning and conditioning 
• Interior vents blown out and cleaned 
• Interior glass cleaned streak-free 
• Dash, trims, and plastics cleaned and protected using quality water-based UV protection products only — no oily silicone dressings 
• Door jambs cleaned 

Optional extras:

• Dog hair removal 
• Deep roof lining cleaning 

Perfect for daily drivers, family vehicles, and maintaining your car’s overall condition and value.

From $300

Generally 1 Day To Complete